Table of Contents
Advertisement
P/N 0520677_W
INSTALLING PUMP & COLLECTION PAN KIT
3. Replace cover plates.
4. Connect tubing to pump.
5. Place pan and pump under case.
6. Connect tubing to condensate pan.
3.
4. & 5.
Connect ½" Tube from
Drain to the Pump
6.
Secure Pan Tubing
Plug Pan into GFCI Outlet
Condensate Pan
Tubing to Pump
Condensate Pan
(Installed on top of case)
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Collection Pan & Pump Installed
(RFMN5)
NOTE:
Factory-Installed Tee
Pump Discharge Line
(photo for reference)
Pump Assembly placed
on Floor under Case
6A. 2 & 3-door medium temperature cases do not
have a condensate pan. Cases have a hose and
clamp that need to be field-installed and placed 2"
into condensing unit water outlet as shown below.
(only for 2 & 3-door medium temp. cases)
6A
WASHER 1/4"
CLAMP 3/8"
Freedom Line Reach-in
2-11
Case Wire Whip
WHEN INSTALLING MAKE S
THAT THE TUBE CU HAS TH
WATER OUTLET IN UNIT AS
SHOWN
TUBE CU
CLAMP HOSE 1/4" TO 5/8"
HOSE REINFORCED
Advertisement
Table of Contents
