Remote Sensor And Solenoid Valves; Figure 3-7: Remote Sensor Connector Pinouts; Figure 3-8: Remote Solenoid Return Connector; Table 3-5: Required Rs-232 Input - Teledyne 3000TB Operating Instructions Manual

Trace Oxygen Analyzer

Table 3-5: Required RS-232 Input

Message Interval

3.3.9 Remote Sensor and Solenoid Valves

The 3000TB is a single-chassis instrument, which has its own
sensor and, in the –C option, its own gas-control solenoid valves.
However, The REMOTE SENSOR and SOLENOID RETURN
connectors are provided for use with a remote sensor and/or gas flow
control valves, if desired. See Figures 3-7 and 3-8.

Figure 3-7: Remote Sensor Connector Pinouts

Figure 3-8: Remote Solenoid Return Connector

The voltage from these outputs is nominally 0 V for the OFF and
15 V dc for the ON conditions. The maximum combined current that can
be pulled from these output lines is 100 mA. (If two lines are ON at the
Teledyne Analytical Instruments
Parameter Setting
Baud 2400
Byte 8 bits
Parity none
Stop Bits 1
2 seconds.
Installation
29