Unit Setting - Omron E8F2 Manual

E8F2

Unit Setting

OUT1 OUT2 kPa Torr Psi
1. Press the SET key while unt is displayed to display the unit presently set.
2. Press the Up or Down key to select the unit.
3. Press the SET key to select the displayed unit and display unt again.
4. Press the Up and Down keys simultaneously, to display unt again without selecting the unit.
Pressure Setting Method Selection
Setting item
OUT1 OUT2 kPa Torr Psi
or
1. Press the SET key while m- - a is displayed to display the pressure setting method presently set.
2. Press the Up or Down key to select the pressure setting method.
3. Press the SET key to select the displayed pressure setting method and display m- - a again.
4. Press the Up and Down keys simultaneously to display m- - a without selecting the unit.
Unit setting in E8F2-AN0C
kPa
OUT1 OUT2 kPa Torr Psi
Pressure setting
Manual setting
OUT1 OUT2 kPa Torr Psi
OUT1 OUT2 kPa Torr Psi
Auto-teaching
OUT1 OUT2 kPa Torr Psi
m: Manual setting (The ON and
OFF points are manually set.)
a: Auto-teaching (The ON and OFF
points are set automatically.)
11
E8F2
OUT1 OUT2 kPa Torr Psi