Omron E8F2 Manual page 11

E8F2
Output-Type Setting
Setting item
OUT1 OUT2 kPa Torr Psi
1. Press the SET key while ope is displayed to display the output type of OUT1 presently set.
2. Press the Up or Down key to select the output type.
3. Press the SET key to select the displayed output type and display the output type of OUT2 presently set.
4. Press the Up or Down key to select the output type.
5. Press the SET key to select the displayed output type and display ope again.
6. Press the Up and Down keys simultaneously to display ope again without selecting the unit.
Returning to Measurement Mode
Setting item
Unit setting
Pressure setting
or
OUT1 OUT2 kPa Torr Psi OUT1 OUT2 kPa Torr Psi
Entering the Setting Item:
•
Press the SET key for approximately 2 s to enter the item that has been set.
Not Entering the Setting Item:
•
Press the Up and Down keys simultaneously so that the item set will not be entered.
or
Output-type setting
OUT1 N.O
OUT1 OUT2 kPa Torr Psi
or
OUT1 N.C
OUT1 OUT2 kPa Torr Psi
Output configuration
or
OUT1 OUT2 kPa Torr Psi
OUT2 N.O
OUT1 OUT2 kPa Torr Psi
or
OUT2 N.C
OUT1 OUT2 kPa Torr Psi
no: Normally open
nc: Normally closed
Entered
Measurement
Not entered
12
mode
E8F2