Application Examples; Specifications - Omron E8F2 Manual

E8F2

Application Examples

J CHIP ATTACHMENT
CHECKS
E8F2

Specifications

J RATINGS/CHARACTERISTICS
Item
Power supply voltage
Current consumption
Pressure type
Rated pressure range
Pressure setting range
Withstand pressure
Applicable fluid
Operating mode(s)
Repeat accuracy (ON/OFF output)
Linearity
Response time (ON/OFF output)
Linear output
ON/OFF output
Display (See Note 2.)
Display accuracy
Circuit protection
J AIR PRESSURE
CHECKS
E8F2- E8F2- E8F2-
A01C B10C AN0C
12 to 24 VDC ± 10% with a ripple (p-p) of 10% max.
70 mA max. (See Note 1.)
Gauge pressure
0 to 100 0 to 1 0 to
kPa MPa - - 101
kPa
0 to 100 0 to 1 0 to
kPa MPa - - 101
kPa
400 kPa 1.5 MPa 400 kP
Non-corrosive gas and non-flammable gas
Hysteresis mode
Window mode
Auto-teaching mode
±1% FS max.
±1% FS max.
5 ms max.
1 to 5 V± 5% FS with an output impedance of 1 kΩ and a permissible resistive load of 500 kΩ min.
NPN open collector (NO/NC)
Load current: 30 mA max.
Output applied voltage: 30 VDC max.
Residual voltage: 1 V max. with a load current of 30 mA
3.5-digit red LED
Green LED bar indicator
The orange LED is lit for two independent outputs with output transistor turned ON
Green unit indicator
±3% FS ± 1 digit max.
Reverse polarity connection, load short-circuiting
3
J PCB AND WAFER
ATTACHMENT CHECKS
E8F2
E8F2- E8F2- E8F2-
D01C D10C DN0C
0 to 14.5 0 to 145 0 to
psi psi - - 14.6
psi
0 to 14.5 0 to 145 0 to
psi psi - - 14.6
psi
58 psi 217.6 58 psi
psi
E8F2
E8F2
E8F2- E8F2- E8F2-
A01B B10B AN0B
0 to 100 0 to 1 0 to
kPa MPa - - 101
kPa
0 to 100 0 to 1 0 to
kPa MPa - - 101
kPa
400 kPa 1.5 MPa 400 kPa