Omron sysmac NJ Series Connection Manual page 35
Machine automation controller, displacement sensor
Hide thumbs
Also See for sysmac NJ Series:
- User manual (578 pages) ,
- Network connection manual (32 pages) ,
- Instruction & reference manual (20 pages)
Table of Contents
Advertisement
10
After entering, right-click and
select Create New Data Type
from the menu.
Enter S_EIPInput in the Name
Column.
11
In the same way as steps 7 and
8, enter the following data in the
newly added rows.
・Name:
SensorHeadStatusFlag1
Base type: U_EIPFlag
・Name:
SensorHeadStatusFlag2
Base type: U_EIPFlag
・Name:
SensorHeadStatusReserve
Base type: U_EIPFlag
・Name: CommandCodeEcho
Base type: DWORD
・Name: ResponseCode
Base type: DINT
・Name: ResponseData
Base type: DINT
・Name: OutputData
Base type: DINT[8]
*After entering, the base type
changes to ARRAY[0..7] OF
DINT.
*Enter each member of the data
type in order from the top of the
list described in 6.2. Data
Types to Use for Tag Data
Links.
7．EtherNet/IP Connection Procedure
32
Advertisement
Table of Contents
