7.3.5.
Setting the Connections
Set the target variables (that receive the open request) and the originator variables (that
request for opening), and then set the connections (tag data link table).
1
Click the Connection Button on
the Built-in EtherNet/IP Port
Settings Connection Settings
Tab Page.
2
Right-click any open space in
Connection and select Add from
the menu.
3
A new connection can be
entered. Select the newly added
entry cell.
Select 192.168.250.50 from the
pull-down list of Target Device.
4
The default_001 connection is
created.
Check that Consume Data
From/Produce Data To is
selected in the Connection I/O
Type Column.
5
The target variable and the
originator variable can be set.
6
Click the entry cell for Input in
the Target Variable Column.
When you press Ctrl + Space
on the keyboard, an appropriate
instance number appears.
*The instance number also
appears even when the first
character of the instance
number ''1'' is entered.
Select the instance number.
Likewise, set the target variable
for Output.
7.EtherNet/IP Connection Procedure
37