Omron sysmac NJ Series Connection Manual page 22

2
Set The IP address of Personal
computer to 192.168.250.100.
*The IP address can be
changed in the following way.
(1)Start Personal computer and
log in using an administrator
account. From the Windows
Start menu, select Control
Panel - Network and
Internet - Network and
Sharing Center, and click
Change Adapter Settings.
Double-click Local Area
Connection.
*The procedure steps may be
different depending on the
environment settings of
Personal computer.
(2)The Local Area Connection
Status Dialog Box is
displayed. Click Properties.
(3)The Local Area Connection
Properties Dialog Box is
displayed. Select Internet
Protocol Version 4
(TCP/IPv4), and click
Properties.
*The display differs depending
on the configuration of
Personal computer.
(4)The Internet Protocol Version
4 (TCP/IPv4) Properties
Dialog Box is displayed.
Select Use the following IP
address, and set the IP
address to 192.168.250.100
and the subnet mask to
255.255.255.0.
Click OK.
(5)Click Close or OK to close all
the displayed dialog boxes.
7．EtherNet/IP Connection Procedure
Dialog box in (2)
Dialog box in (3)
Dialog box in (4)
19