Omron sysmac NJ Series Connection Manual page 20

5
Connect Switching hub to
Personal computer and to
Ethernet connector on Sensor
Controller with LAN cables.
Connect 24 VDC power supply
(for Switching hub) to Switching
hub.
6
Connect 24 VDC power supply
to 24 V input terminal block.
*For details on specifications of
24 VDC power supply available
for Sensor Controller, refer to
the Displacement Sensor
ZW-7000 series Confocal Fiber
Type Displacement Sensor
User's Manual (Cat. No. Z362).
7．EtherNet/IP Connection Procedure
LAN cable
24VDC power supply
24VDC power supply
LAN cable
17