Omron sysmac NJ Series Connection Manual page 26

Machine automation controller, displacement sensor

Hide thumbs Also See for sysmac NJ Series:

Table of Contents

Double-click System data under

Configurations and Setup -

DeviceGroup - 1:ZW-7000(2.0)

:Online - System in the

Multiview Explorer.

The System data Tab Page is

displayed.

Click the Ethernet

communication settings

Button.

The Ethernet communication

settings view is displayed.

Select EtherNet/IP from the

pull-down list of Fieldbus.

Check that the following fieldbus

settings are made.

Fieldbus: EtherNet/IP

GATE signal ON time:

Precautions for Correct Use

If you use the hold function on Sensor Controller, set the value of GATE signal ON time

greater than RPI.

1 ms (Default)

7．EtherNet/IP Connection Procedure

Table of Contents