7
Select Communications Setup
from the Controller Menu.
8
The Communications Setup
Dialog Box is displayed.
Check that the Direct connection
via USB Option is selected in
Connection type.
Click OK.
9
Select Online from the
Controller Menu.
A confirmation dialog box is
displayed. Check the contents
and click OK.
*The displayed dialog depends
on the status of Controller.
Check the contents and click
on an appropriate button to
proceed with the processing.
10
When an online connection is
established, a yellow bar is
displayed under the toolbar.
Additional Information
For details on the online connections to Controller, refer to Section 6. Online Connections to
a Controller of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
7.EtherNet/IP Connection Procedure
40