Omron sysmac NJ Series Connection Manual page 11

5．Applicable Devices and Device Configuration
Additional Information
For specifications of 24 VDC power supply available for Switching hub, refer to the Switching
Hub W4S1-series Users Manual (Cat. No. 0969584-7).
Additional Information
For specifications of 24 VDC power supply available for Sensor Controller, refer to the
Displacement Sensor ZW-7000 series Confocal Fiber Type Displacement Sensor User's
Manual (Cat. No. Z362).
Additional Information
The system configuration in this document uses USB for the connection between Personal
computer and Controller. For information on how to install the USB driver, refer to A-1 Driver
Installation for Direct USB Cable Connection in Appendices of the Sysmac Studio Version 1
Operation Manual (Cat. No. W504).
8