Meridian SEED TITAN 2SE Operator's Manual page 47

Operator's Manual: Seed Titan
4.3.3 Drive Belt Tension:
Note:
2SE are shown in Figures 62 to 65
4SE are shown in Figures 66 to 68
The conveyor is driven by a belt from the engine.
The belt is tightened by moving the engine base
with the adjusting bolt.
IMPORTANT:
Always install and secure the
guard before resuming work.
1. Loosen the four engine mounting bolts (1).
2. Loosen the engine base stabilizing bolt.
3. Loosen the jam nut on engine base adjusting
bolt (2).
4. Move the engine base to set the desired belt
tension.
5. Tighten the jam nut.
6. Tighten the four engine mounting bolts.
7. Tighten the engine base stabilizing bolt.
Revised 02.2021
2SE/4SE Box Seed Tender
™
Fig 62 - Titan 2SE engine mount bolts
Fig 63 - Titan 2SE engine mount bolts
Fig 64 - 2SE Engine base stabilizing bolts
Fig 65 - Engine base adjusting bolt
4-7