Attaching To Tow Vehicle - Meridian SEED TITAN 2SE Operator's Manual

Operator's Manual: Seed Titan

3.5 ATTACHING TO TOW VEHICLE

UPENDING HAZARD
Do not stand over hitch when unhooking
the trailer from the tow vehicle.
Load seed box 1 (closest to hitch) first
to keep weight on the hitch.
Unload seed box 2 first
to keep weight on the hitch.
CRUSH HAZARD
Ensure that all bystanders, especially
small children, are clear of work area.
Ensure there is enough room
and clearance to safely
back up to the tender.
1. Complete the Pre-Operation Checklist.
2. Use the trailer jack to lift the hitch above
the height of the receiver on the tow vehicle
(standard hitch assembly shown).
3. Remove the retainer pin. Release or open
the receiver by pulling the locking cover
back, as shown.
3-10
2SE/4SE Box Seed Tender
™
BOX 1
(closest to hitch)
Fig 23 - Box position identification
Fig 24 - Trailer jack
Fig 25 - Hitch receiver Retainer pin
Fig 26 - Hitch receiver lock cover
BOX 2
(Rear of tender)
Revised 02.2021