Work Preparation; Placement Safety; Lock-Out Tag-Out Safety - Meridian SEED TITAN 2SE Operator's Manual

Operator's Manual: Seed Titan

2.6 WORK PREPARATION

• Never operate the tender and its engine until
you have read this manual, and understand
the information.
Also, read the engine operator's manual.
• Be familiar with the safety messages found on
the decals around this unit.
• Personal protective equipment (PPE)
include:
- Hard hat
- Eye protection
- Protective shoes
- Work gloves
They are recommended during
installation, placement, operation,
maintenance and removal of the
equipment.
• Do not allow long hair, loose fitting clothing or
jewelry to be around equipment.
• PROLONGED EXPOSURE TO LOUD NOISE
MAY CAUSE PERMANENT HEARING LOSS!
Agricultural equipment can often be
noisy enough to cause permanent,
partial hearing loss. We recommend
that you wear hearing protection on
a full-time basis if the noise in the
Operator's position exceeds 80 db.
Noise over 85 db on a long-term basis can
cause severe hearing loss.
Noise over 90 db adjacent to the operator over
a long-term basis may cause permanent, total
hearing loss.
Note:
Hearing loss from loud noise
(tractors, chain saws, radios, etc.)
is cumulative over a lifetime
without hope of natural recovery.
2-6
2SE/4SE Box Seed Tender
™
• Clear working area of stones, branches or
hidden obstacles that might be hooked or
snagged, causing injury or damage.
• Operate only in daylight or good artificial light.
• Be sure machine is in a stable position, is
adjusted and in good operating condition.
• Ensure that all safety guards and safety decals
are properly installed and in good condition.
• Before starting, inspect the unit for any loose
bolts, worn parts, cracks, leaks or frayed belts.
Make the necessary repairs.
Always follow the maintenance instructions.

2.7 PLACEMENT SAFETY

• Never move by hand.
• Locate tender providing enough space for
trucks to load or unload.
• Operate tender on level ground, free of debris.

2.8 LOCK-OUT TAG-OUT SAFETY

• Establish a formal Lock-Out Tag-Out program
for your operation.
• Train all operators and service personnel
before allowing them to work around the area.
• Provide tags on the machine and a sign-up
sheet to record tag out details.
Revised 02.2021