Meridian SEED TITAN 2SE Operator's Manual page 33

Operator's Manual: Seed Titan
4. Make sure there are no foreign objects or
impacted seed blocking the chute leading to
the conveyor belt.
5. Clean the frame of debris.
6. Clear the area of all workers and bystanders.
PINCH POINT
Keep body parts away from between
seed box and frame when loading.
7. Use a suitable lifting device, to carefully
place the seed box onto the tender.
8. Make sure the seed box is seated properly
over the hopper and rubber chute.
9. Make sure the chute contacts the bottom of
the seed box.
10. Flip the lock-down arms over.
- Insert the pins to secure the arms in place,
to hold the seed box.
IMPORTANT:
Rubber chute must be checked after loading
seed boxes to ensure they are sealed all
around prior to opening seed box gates.
IMPORTANT:
Seed boxes must be locked down at all times
while loaded on the unit, empty or full.
11. Open the seed box gate valve.
12. IMPORTANT: To remove seed boxes:
- Work slowly to identify any shifting weight
quickly.
- Start by unloading the box(es) from the rear.
- Unload the front box(es) second.
Revised 02.2021
2SE/4SE Box Seed Tender
™
Fig 35 - Seed box chute
Fig 36 - Lower seed box over chute
Fig 37 - Chute contacts seed box
Fig 38 - Close and latch corner lock-down arms
3-13