Machine Components - Meridian SEED TITAN 2SE Operator's Manual

Operator's Manual: Seed Titan
The Meridian Seed Tenders is designed as a bulk
seed transfer unit to transport large amounts of
seed into a planter or drill.
Large bulk seed boxes are loaded onto the seed
tender frame. The center-mounted conveyor
then transfers the seed from the seed boxes into
a planter or drill. Slide gates on the unit control
the flow of seed into the conveyor.
A gas engine mounted on the frame powers
the conveyor drive pulley. A centrifugal clutch
reduction case on the engine output shaft
engages when the engine speed reaches 1400
RPM. The conveyor belt drive system transmits
power from the engine to the conveyor. Use the
conveyor throttle switch to increase or decrease
the speed of the conveyor.
The 2SE conveyor will unload to either side and
out of the back of the unit.
The 4SE conveyor will unload to either side, out
of the back of the unit, or out of the front of the
unit.
f
e
b
c
d
Fig 5 - Seed Titan™ 2SE tender
3-2
2SE/4SE Box Seed Tender
™

3.1 MACHINE COMPONENTS

g
i
h
j
a
a. Trailer Frame
b. Break-Away Trailer Brake System
c. Trailer Jack
d. Safety Chains
e. Document Holder (inside frame)
f. Seed Box Frame
g. Conveyor Tube
h. Discharge Spout
i. Conveyor Tube Lock
j. Conveyor Rotation Lock Handle
h
g
c
d
b
Fig 6 - Seed Titan™ 4SE tender
i
f
e
Revised 02.2021
a