Table of Contents
Advertisement
Operator's Manual: Seed Titan
4. Slowly back the tow vehicle until the hitch
and ball are aligned.
5. Lower the hitch onto the ball.
6. Raise the jack and place it in its stowed
position.
7. Close the receiver by pulling the spring
loaded locking collar back to release the
hitch mechanism.
- Install the retainer clip to prevent unwanted
opening of the receiver.
8. Attach the safety chain securely to the tow
vehicle to prevent unexpected separation.
- Cross the chains when attaching.
9. Connect the wiring harness for the lights
and brakes.
10. Connect the break-away system cable to
the tow vehicle.
- Plug the key on the end of the cable into
the receiving unit.
11. Route all the cables in a manner that will
prevent snagging.
- Be sure to provide slack for turning.
IMPORTANT:
Conveyor tube must be locked in
transport position at all times while towing.
UPENDING HAZARD
Seed tender must be connected to
tow vehicle at all times during operation
to avoid unit from tipping backwards.
Revised 02.2021
2SE/4SE Box Seed Tender
™
Fig 27 - tow vehicle ball and trailer hitch
Fig 28 - Raise and stow jack
Fig 29 - Break-Away cable
Fig 30 - Break-Away cable
3-11
Advertisement
Table of Contents
