7.0 S of t wa r e i n s tr u c ti o n fo r Ewe l l i x L I F T K I T C o m p o n e n t fo r T Mf l ow
7.0 Software instruction for Ewellix
LIFTKIT Component for TMflow
7.1 Introduction
The Ewellix LIFTKIT component allows customers to inte-
grate the LIFTKIT telescopic pillar's capabilities with TMflow
applications. Currently, there is only one component availa-
ble for LIFTKIT integration: "Command".
7.2 Installation
Download the zipped component file from the Ewellix web-
site: https://www.ewellix.com/en/gb/products/telescop-
ic-pillars/liftkit/liftkit-om
1. 1.Take the zipped component file and place it into a
TMROBOT-formatted USB drive or a network drive that is
mapped to the robot's Network Service feature.
1.1. For the USB stick to be in TMROBOT format, it
needs to be on the NTFS file system and named
TMROBOT (all-caps), as shown below.
1.2. The Network Service feature looks like this:
11