Table of Contents
Advertisement
1.3 LIFTKIT designations
LIFTKIT contains a telescopic pillar, a controller and addi-
tional accessories enabling easy integration with a collabo-
rative robot. Depending on LIFTKIT typekey chosen, differ-
ent configurations of these included products are possible.
L I F T K I T –
Product group
Robot
OM
Omron robot
Stroke*
500 mm
600 mm
700 mm
800 mm
900 mm
Electrical options
11
120 VAC / US cable
22
230 VAC / EU cable
23
230 VAC / CN cable
24
230 VAC / UK cable
25
230 VAC / CH cable
Pillar type
601
TLT
* Longer stroke up to 1 400 mm available on request
4
4
–
–
0 0 –
1.4 Related documents
This instruction manual does not replace the operating ma-
nuals of the included products, but adds additional instruc-
tions relevant to the setup and operation of the LIFTKIT's
system related to collaborative robots.
For general information and safety instructions please refer
to installation, operation and maintenance manuals available
at www.ewellix.com.
• TC-08023-EN-May 2020 THG-TLG-TLT operating manual
• TC-08005-EN-March 2020 SCU operating manual
1.5 Target audience
This manual is intended for qualified technical personnel
who install and use LIFTKIT in their application. This manual
and the corresponding operating manuals should be kept
available for reference at all times.
Qualified personnel is able to carry out assigned work and to
recognize and prevent possible dangers self-reliantly due to
its professional training, knowledge and experience as well
as profound knowledge of applicable regulations.
L I F T K I T- O M
Advertisement
Table of Contents
