Table of Contents
Advertisement
7.0 S of t wa r e i n s tr u c ti o n fo r Ewe l l i x L I F T K I T C o m p o n e n t fo r T Mf l ow
7.5 Software update
SBOX
Software updates can be done by flashing a new image to
the controller SD card.
1. Remove all cables attached to the SBOX
2. Unplug the USB and the ethernet connector from the
controller:
3. Move controller to the front plate:
4. Remove the SD card using a small tool like a pliers
5. Download and install one of these tools:
- Raspberry imager, from https://www.raspberrypi.org/
downloads/
- balenaEtcher, from https://www.balena.io/etcher/
6. Copy Image on SD card:
6.3. Place SD card into your laptop
6.4. Do not format SD card
6.5. Start Raspberry imager or balenaEtcher
6.6. Choose Image
6.7. Select SD Card
6.8. Start writing process
7. Put SD card back into Controller following the steps 1 – 4
in reverse.
21 21
Advertisement
Table of Contents
