Table of Contents
Advertisement
7.6 IP address
The SBOX-L-01 uses a static IP address. The default ad-
dress is 192.168.1.100.
Changing the IP address
1. Create a file called "ip_changer.conf" on your PC
2. Insert the following content:
static ip_address=192.168.1.100/24
static routers=192.168.1.1
static domain_name_servers=192.168.1.1
3. Change the IP addresses to your needs. Make sure that
the "/24" stays behind the static IP address.
4. Put the file on an USB Stick.
5. Remove all cables from the SBOX-L-01
6. Open the Box
7. Insert USB Stick into the controller
8. Close the Box
9. Plug in the power cable into the SBOX-L-01
10. Switch on the SBOX-L-01
11. Wait 5 Minutes
12. Switch off the SBOX-L-01
13. Remove all cables from the SBOX-L-01
14. Open the Box
15. Remove USB Stick
16. Close Box
17. Connect all cables again
18. If everything worked, the USB Stick has the following
empty file on it:
update_ip_address_successfull_from_"Name of the
USB Stick"
22
22
L I F T K I T- O M
Advertisement
Table of Contents
