Liftkit Components; Scope Of Delivery - Omron Ewellix LIFTKIT-OM Installation, Operation And Maintenance Manual

Hide thumbs

Table Of Contents

Table of Contents

3.0 LIFTKIT components

3.1 Scope of delivery

• 1 Lifting column TLT

• 1 Control unit SCU16/56/96

• 1 SBOX power cable EU/US/CH/CN

• 1 RS232 interface cable M/0133976

• 1 Controller I/O cable M/0133975

• 1 EHA3A operating handswitch

• 1 OMRON attachment plate

• 1 bottom mounting plate

QUICK START GUIDE

LIFTKIT

Setting up LIFTKIT

For more details on each step, read the corresponding installation, operation and maintenance manual.

Please check on ewellix.com/products/telescopic-pillars/liftkit.

1. Mount interface plates to

pillar (top and bottom)

2. Connect all cables

LIFTKIT-UR

Others

Motion control

Robot controller

Electrical

Robot

230/120 V AC

attachment

230/120 V AC

attachment

24 V DC

plate

(not included

SBOX

in LIFTKIT-0S)

Controller

3. Initialize LIFTKIT (First use only!)

3.1. Press both handswitch buttons at the same

time, until controller beeps (5sec)

3.2. Move pillar downwards until end stop (beep)

3.3. Move pillar upwards until end stop (beep)

4. Screw robot to pillar, install

URCaps software

ewellix.com

All contents of this publication are the property of Ewellix, and may not be reproduced or given to third parties (even extracts) without permission. Although great care has been taken in the

production of this catalog, Ewellix does not take any responsibility for damage or other loss resulting from omissions or typographical errors. The photo may differ slightly in appearance from the

actual product. Due to continuous improvements being made in our products, the product's appearance and specifications are subject to change without notice.

PUB NUM TC-08048-EN-March 2021

Quick start guide

Control unit SCU16/56/96

SBOX

SBOX Key

SBOX

I/O cable

L I F T K I T

SBOX power

SBOX to controller

cable

power cable