Connection To The Water Network - Saeco IDEA RST Technical Manual

5.3

Connection to the Water Network

Before connecting the appliance to the
water network, please read and follow the
applicable regulations in force in your
country.
Make sure the water network provides
drinking water, with pressure ranging
between 0.15 MPA and 0.8 MPA (1.5 and
8 bars).
Water hardness should not be lower than
8°F.
The machine should be supplied with
water treated with a descaling device,
particularly in case of water with high
content of calcium and magnesium salts
(hard water).
Before connecting the water filter to the
machine, perform a wash cycle until the
water is clear. Then connect the water
filter to the machine.
The water network hose must be certified
according to the IEC 61770 standard.
In case you need to move the machine to
a different place, the old fitting unit must
be replaced with a new one (water
network connecting hose).
• Connect the filter to the water network.
C Water Filter
D Water Net
E Drain pipe
• Connect a drain pipe to the fitting and fix it with a serrated clamp.
• Connect the machine to the drinking water network through the
fitting (using tube and fitting made of materials suitable for food).
H Drain fitting
I Dispensing fitting
G electric power cord
F supporting feet
• Insert the drain and filling pipes into the proper hole (see chapter
"Unpacking and Positioning").
English
15