Safety; Preamble; General Safety Instructions - Saeco IDEA RST Technical Manual

English
3

SAFETY

3.1

Preamble

In accordance with the applicable standards and regulations, SAECO
VENDING has prepared a technical file relating to the Idea RST
appliance at its premises, acknowledging the following standards in
the design stage:
- EN 55014
- EN 6100-3-2
- EN 61000-3-3
- EN 61000-4-2
- EN 61000-4-3
3.2

General Safety Instructions

It is forbidden to:
• disable the safety devices installed on the appliance;
• perform maintenance operations on the appliance, before unplugging
the power cord;
• install the appliance outdoors. It is advisable to place it in a dry place
where the temperature does not drop below 2°C, in order to
prevent any possible freezing.
• use the appliance for purposes other than those indicated in the sale
contract and in this manual;
• electrically connect the appliance using multi-sockets or adapters;
• use jets of water for cleaning operations.
10
- EN 61000-4-4
- EN 61000-4-5
- EN 61000-4-11
- EN 60335-2-75
- EN 60335-1
It is mandatory to:
• check conformity of the power supply;
• use original spare parts;
• carefully read the instructions contained in this manual and in the
attached documents;
• use personal protective equipment when performing installation,
testing and maintenance operations.
• Use a new gasket kit each time you disconnect and connect the
machine again to the water system.
Precautionary measures to prevent human errors:
• make the operator aware of safety issues;
• handle the appliance, either packaged or unpackaged, in complete
safety;
• deeply know the installation procedures, its correct operation and its
limits;
• dismantle the appliance in complete safety, in accordance with the
workers' health and environmental protection regulations in force.
To prevent machining residues from
coming into contact with the beverages,
dispense about 0.5 l of water for each
dispensing path before definitely starting
the machine. The dispensed beverages can
be drunk only after performing this
operation.
Do not install the appliance in a location
where water jets may be used.
Only install the appliance in places where it
can be supervised by qualified personnel.
In case of failure or malfunctioning, please
refer only to the qualified personnel of the
technical service.
The manufacturer is not liable for damage
to persons or property resulting from
failure to follow the safety instructions
provided in this section.