Saeco IDEA RST Technical Manual page 33

Automatic machine for espresso coffee
Hide thumbs Also See for IDEA RST:
Table of Contents

Advertisement

0...8
5.2
Cleaning sec.
1...8
5.3
Cappucinat.Rinsing
10...120
5.4
Cleaning type
all
after product
Auto rins.
5.5
Extra milk quantity
0...10
5.6
Extra milk delay
0...1800
6
Counters
6.1
Espresso
000000
6.2
Espresso x2
000000
6.3
coffee
000000
6.4
Coffee x2
000000
6.5
AMERICANO/JUG
000000
6.6
LARGE COFFEE
000000
6.7
macchiato
000000
6.8
Latte Macchiato
000000
6.9
Cappuccino
000000
6.10
Caffelatte
000000
6.11
milk
000000
6.12
FLAT WHITE
000000
6.13
HOT WATER
000000
6.14
Coffee boiler lt.
000000
6.15
Water boiler lt.
000000
6.16
Steam boiler lt.
000000
6.17
Total group rinsing
000000
6.18
Grounds
6.17.1
Visualize after
0...150
6.17.2
Stop after
0...150
7
SERVICE
7.1
Visualize after
Default:
1 sec.
The "CLEANING" option shows the length of steam washing, which is performed at the end of any milk dispensing.
It can be set from 1 to 8 seconds.
Default:
3 sec.
The "CAPPUCCINAT. RINSING" option shows that you can set a programmed rinse for the Cappuccinatore.
This option can be set for a span of time that ranges from 10 to 120 minutes with 10 minutes step.
Default:
10 min.
- the washing cycle is carried out both at the end of the dispensing cycle and after a period of inactivity
- the washing cycle is carried out at the end of the dispensing cycle
- the washing cycle is carried out after a period of inactivity
The "EXTRA MILK QUANTITY" option shows that you can set an extra milk time that is added to the time already set for the first milk or mixed product.
Default:
0
The "EXTRA MILK DELAY" option shows that you can set the delay after which an extra amount can be applied.
Default:
0
the counters are reset as follows:
select the number to reset and press OK. Then select YES or press ESC to cancel the selection.
counters with values expressed in cycles
counters with values expressed in litres that approximately show the amount of water flowed in the different circuits of the appliance
Default:
25
Default:
30
The "VISUALIZE AFTER" option shows the number of cycles after which the "SERVICE MESSAGE" is displayed.
English
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cap020aCap020bCap020b 2m

Table of Contents