Saeco IDEA RST Technical Manual page 38

English
8.2.4 MILK PROGRAMMING
"MILK PROGRAMMING" is a direct control allowing to program and
store the milk quantity for the beverage chosen.
The display shows the
Select "MILK
programming icon (1)
PROGRAMMING"
Press and hold the button The machine starts dispensing
corresponding to the milk only
beverage to be
programmed
Release the button The machine will stop
corresponding to the beverage dispensing milk.
chosen as soon as the desired
amount of milk is reached
Programming is complete The next time you dispense the
selected beverage
the programmed quantity of milk
will be dispensed.
(1) During milk programming the icon shown in the figure is
displayed.
8.2.5 LOADING LOGO
The loading logo procedure is possible
only from the GUI 2.0 version and
successive and from the CPU 4.01.19 and
successive. For GUI software update,
please refer to the Software Update KIT.
The procedure to follow for the loading of the personalised logo by
means of proprietary software is shown below.
Home screen
38
From "File" menu, select "Open Image" and choose the image of the
logo to upload.
The image of the logo will appear in the screen.
From "Settings" menu, select "Serial Communication"