Light Switch; Cruise Control Buttons - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

6 CONTROLS
6.5
6.6

Cruise control buttons

Possible states
• Cruise control button
mode is displayed on the dash.
+RES button is pressed briefly – The last saved speed is reapplied. Every subsequent brief pressing increases
•
the target speed by 1 km/h or 1 mph.
+RES button is pressed and held – The target speed increases in increments of 5 km/h or 5 mph.
•
‑SET button is pressed briefly – The cruise control function is activated and the current speed is maintained.
•
Every subsequent brief press reduces the target speed by 1 km/h or 1 mph.
‑SET button is pressed and held – The target speed decreases in increments of 5 km/h or 5 mph.
•
16

Light switch

E02216-10
Cruise control buttons
Info
The functions described here apply to models without adaptive cruise control (ACC) or with active cruise
control mode CC Only.
1 2 3
, and
is pressed briefly – The cruise control function is switched on or off. The operating
1
The light switch is fitted on the combination switch on the
left.
Possible states
Low beam on – Light switch in position
position, the low beam and tail light are switched on.
High beam on – Push the light switch to position
In this position, the high beam and the tail light are
switched on.
Headlight flasher. – Push the light switch into posi-
C
tion .
are located on the left side of the combination switch.
A
. In this
B
E02327-10
.