Setting The Shift Lever Stub; Adjusting The Basic Position Of The Foot Brake Lever - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

8.11

Setting the shift lever stub

8.12

Adjusting the basic position of the foot brake lever

–
Remove screw
–
Position the shift lever stub with the screw in one of drilled
2
holes depending on the desired lever length.
Guideline
Standard
–
Tighten the screw.
Guideline
Remaining screws,
chassis
E02244-10
–
Detach spring
–
2
Loosen nut
–
Remove screw
–
To adjust the basic position of the foot brake lever to individ-
ual requirements, turn ball joint
Info
The range of adjustment is limited.
The screw must be screwed into the ball joint by at
M00828-10
least 5 turns.
–
Hold ball joint
Guideline
Remaining nuts,
chassis
–
Mount and tighten screw
Guideline
Screw, ball joint
of push rod on
foot brake cylin-
der
–
Attach spring
1
along with the shift lever stub.
Middle hole
M6 10 Nm (7.4 lbf ft)
1
.
.
3
.
4
accordingly.
4 2
and tighten nut .
M6 10 Nm (7.4 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
1
.
ERGONOMICS 8
Loctite 243™
®
77