Engine Speed; Shift Light; Cruise Control Indicator - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

7.10

Engine speed

7.11

Shift light

7.12

Cruise control indicator

The engine speed is shown in area
The engine speed is measured in revolutions per minute.
E02055-10
The shift light is integrated in the rpm gauge display.
The speed for the shift light can be set in the Shift Light menu. The
shift warning light is always active during the running-in phase
(up to 1,000 km / 621 mi). The shift warning light can only be
deactivated, and the values for RPM1 and RPM2 can only be
adjusted after this. At RPM1, the engine speed display flashes red
and at RPM2 the entire display flashes red.
Info
In sixth-gear, the shift light is deactivated when the engine
is warm after the first service.
Coolant temperature
ODO
The shift warning
light always lights up
at
Coolant temperature
E02056-10
ODO
RPM1 Engine speed
display
RPM2 entire display
The operating state and active cruise control are shown in the
area of the display.
Cruise control is operated using the cruise control buttons
( p. 16).
E02058-10
1
of the display.
≤ 35 °C (≤ 95 °F)
< 1,000 km (< 620 mi)
6,500 rpm
> 35 °C (> 95 °F)
> 1,000 km (> 620 mi)
flashes red
flashes red
DASH 7
1
39