Checking The Basic Position Of The Shift Lever - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

8.9

Checking the basic position of the shift lever

Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
If the gear shift lever is permanently touching the boot, the transmission will be subject to excessive load;
this can cause malfunctions of the Quickshifter.
–
Adjust the footrest bracket to the desired position.
E02282-01
–
Mount and tighten screws
Guideline
Screw, front
footrest bracket
E02283-10
–
Mount the rider footrest with spring
Footrest spring plier (58429083000)
–
Mount washer
E02284-10
–
Position the rear brake lever.
–
Mount and tighten screw
Guideline
Screw, ball joint
of push rod on
foot brake cylin-
der
E02280-10
6
.
M8x20 25 Nm (18.4 lbf ft)
5
and pin
3 2
and lock ring .
1
.
M6 10 Nm (7.4 lbf ft)
ERGONOMICS 8
Loctite 243™
®
4
.
Loctite ® 243™
75