Anti Dive (Optional); Fork; Shock - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

7 DASH

7.27.17 Anti Dive (optional)

7.27.18 Fork

7.27.19 Shock

52
Info
The preload adjuster is only adjusted with the engine run-
ning.
In automatic settings Low (optional), Standard (optional)
and High (optional) the spring preload is automatically
adjusted to the load detected by the system during the
journey.
In the Low (optional), Standard (optional) and High
(optional) automatic settings, it's possible that no
adjustment of the spring preload can be detected when
stationary.
Condition
• Model with Suspension Pro.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Suspension is
marked. Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Anti Dive is marked.
–
Press the RIGHT or LEFT button to switch Anti Dive on or off.
When Anti Dive is activated, the damping is automatically adjusted
during braking to prevent the fork from dipping.
E02079-01
Condition
• Model with Suspension Pro.
• The Suspension ModeAdvanced (optional) is activated.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Suspension is
marked. Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Fork is marked.
–
The Fork can be configured by pressing the RIGHT or LEFT but-
ton.
E02081-01
Eight levels are available in the Fork menu.
The damping of the fork is configured by the Fork.
Softest is the setting with the lowest damping, Hardest is the set-
ting with the highest damping.
Condition
• Model with Suspension Pro.
• The Suspension ModeAdvanced (optional) is activated.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Suspension is
marked. Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Shock is marked.
–
The Shock can be configured by pressing
the RIGHT or LEFT button.
E02080-01
Eight levels are available in the Shock menu.
The damping of the shock absorber is configured by the Shock.