Ergonomics; Setting The Front Rider's Seat; Handlebar Position; Adjusting The Handlebar Position - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

8.1

Setting the front rider's seat

8.2

Handlebar position

8.3

Adjusting the handlebar position

Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
Preparatory work
–
Remove the passenger seat. (
Lower the front rider's seat:
–
Attach the front rider's seat to the fuel tank at the
recesses
forward at the same time.
401678-10
Raise the front rider's seat:
–
Attach the front rider's seat to the fuel tank at the
recesses
the same time.
–
Finally, check that the front rider's seat is correctly mounted.
401679-10
Finishing work
–
Mount the passenger seat. (
The holes on the handlebar support are placed at a distance of
from the center.
A
Hole distance
The handlebar can be mounted in two different positions. In this
way, the handlebar can be mounted in the position that is most
comfortable for the rider.
401666-11
p. 96)
1
, and push the front rider's seat down and
1
, and push the rider's seat up and forward at
p. 97)
3.5 mm (0.138 in)

ERGONOMICS 8

A
71