Install wheel studs 1 with spec-
ified torque.
Tighten rear wheel on
wheel flange
Tightening sequence: tighten
diagonally
44 lb/ft (60 Nm)
Mounting muffler (
132).
Muffler
Swivel muffler
CAUTION
Hot exhaust system
Burn hazard
Do not touch hot exhaust
system.
Let rear muffler cool down.
Make sure ground is level and
firm and place motorcycle
on a suitable auxiliary stand.
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Mounting rear-wheel stands
(
116).
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove screws 1.
Pull cover 2 out of holder 3
and remove.
Unscrew nut 1 to loosen
clamp 2 somewhat.
8
131
z