Tighten rear wheel on
wheel flange
Tightening sequence: tighten
diagonally
44 lb/ft (60 Nm)
Mounting muffler (
Muffler
Swivel muffler
Risk of skin burns from hot
exhaust system.
Do not touch hot parts of the
exhaust system.
Let rear muffler cool down.
Make sure ground is level and
firm and place motorcycle
on a suitable auxiliary stand.
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Mounting rear-wheel stands
(
112).
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
128).
Remove screws 1.
Pull cover 2 out of holder 3
and remove.
OE
Unscrew nut 1 to loosen
clamp 2 somewhat.
Remove screw 1 and
washer 2.
Turn muffler 3 counterclock-
wise.
8
127
z