Muffler - BMW R 1250 R 2019 Rider's Manual

Place rear wheel on rear wheel
9
support.
176
Install wheel studs 1 with spec-
z
ified torque.
Tighten rear wheel on
wheel flange
Tightening sequence: Tighten
crosswise
44 lb/ft (60 Nm)
Installing the silencer (

Muffler

Removing the silencer
CAUTION
Hot exhaust system
Burn hazard
Do not touch hot exhaust
system.
Let rear muffler cool down.
Make sure ground is level and
firm and place motorcycle
on a suitable auxiliary stand.
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Mounting rear-wheel stands
( 160).
with center stand
Make sure the ground is level
and firm and place the motor-
177).
cycle on its center stand.
Remove screw 1 from cover 2.
Remove screw 3 from circlip 4.
OE
Remove screw 2 and shim 3.
Remove silencer 1.