Fuses
Replace fuses
Switch off ignition.
Remove rider's seat (
Disconnect plug 1.
ATTENTION
Bypassing defective fuses
Risk of short circuit and fire
Do not bypass defective fuses.
Replace defective fuses with
new fuses.
Consult the fuse assignment
diagram and replace the defec-
tive fuse.
NOTICE
If the fuses blow frequently, have
the electrical system checked by
an authorized specialized work-
shop, preferably an authorized
BMW Motorrad retailer.
Install connector 1.
Installing driver's seat (
75).
Fuse assignments
75).
Fuse carrier 1
10 A (Slot 1: instrument clus-
ter, anti-theft alarm system
(DWA), ignition lock, main relay
and diagnostic socket)
7.5 A (Slot 2: left multifunction
switch, Tire Pressure Control
(TPC/RDC), yaw rate sensor)
8
145
z