Table of Contents
Advertisement
Muffler
Swing muffler outward
CAUTION
Hot exhaust system.
Burn hazard
Do not touch hot exhaust
system.
Make sure ground is level and
firm and park motorcycle on its
center stand.
Allow the muffler to cool down.
Remove screws 1 at front with
washer 2.
Take off muffler cover 3.
Loosen screw 1 of clip.
Remove screw 2 and mounting
plate 3.
Turn muffler 4 outward clock-
wise.
Mounting muffler
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Turn muffler 1 counterclock-
wise until it rests on passenger
footpeg bracket.
Install washer 2 and screw 3.
Muffler on footpeg
bracket
14 lb/ft (19 Nm)
7
133
z
Advertisement
Table of Contents
