Light Sources - BMW R 1200RS 2016 Rider's Manual

Fasten cover 2 in holder 3 and
position.
Install screws 1.

Light sources

Replacing low and high-
beam light sources in
headlight
NOTICE
Light sources featuring spec-
ification ratings for higher lev-
els of illumination are commer-
cially available as special acces-
sories. These light sources have
a shorter service life than con-
ventional light sources and also
generate more heat. Under some
circumstances the high levels of
heat radiation can damage the
headlight assembly.
NOTICE
The operations for replacing the
low-beam headlight described
here apply similarly to the high-
beam headlight.
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
To replace light source, turn
corresponding cover 1 counter-
clockwise and remove.
NOTICE
The operations for replacing the
high-beam light source described
here apply similarly to the low-
beam headlight.
The high headlight beam is lo-
cated in the left-hand and the
low headlight beam in the right-
hand headlight.
8
133
z