BMW R 1200RS 2016 Rider's Manual page 60

4
58
Repeat pressing button 1
briefly, until average value to be
reset is shown in bottom line of
z
display 2.
Press and hold button 1, main-
taining pressure until the dis-
played figure resets.
Configure onboard
computer
Requirement
The motorcycle is stopped.
Switch on ignition (
Repeatedly press button 1
briefly, until
TER
is shown in top line of
display 2.
Press and hold button 1 to
SETUP
start
The following is indicated in
the display depending on the
equipment selected.
46).
SETUP EN-
menu.
The following menu items can be
selected:
Press button 1 briefly to re-
spectively switch to next menu
item.
The menu item appears in the
top line of the display 2.
The adjusted value appears
in the bottom line of the
display 3.
Press button 4 briefly to
change adjusted value.