BMW R 1200RS 2016 Rider's Manual page 117

Place motorcycle on center
stand, ensuring that it is resting
on a firm and level support sur-
face.
Use basic stand with front
wheel mount. The base stand
and its accessories are avail-
able through your authorized
BMW Motorrad retailer.
Loosen mounting bolts 1.
Push two mounts 2 outward,
continuing until front
suspension fits between them.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align two mounts 2 so that
front suspension rests securely
on them.
Tighten securing screws 1.
ATTENTION
Center stand retracts if mo-
torcycle is lifted too high.
Component damage cause by
tipping over
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
8
115
z