BMW R 1200RS 2016 Rider's Manual page 127

service facility, preferably a
BMW Motorrad retailer. In some
cases the data stored in the
control units can be adapted for
the new wheel sizes.
TPC/RDC sticker
with Tire Pressure Control
OE
(TPC/RDC)
ATTENTION
Improper tire removal
Damage to the TPC/RDC sen-
sors
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC/RDC sensor.
On motorcycles equipped with
RDC, there is a sticker on the
wheel near to the position of
the TPC/RDC sensor. When
changing the tire, it is important
to take care not to damage the
TPC/RDC sensor. Draw the at-
tention of the BMW Motorrad re-
tailer or tire fitter to the TPC/RDC
sensor.
Removing front wheel
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear-
wheel stand.
Mounting rear-wheel stands
( 116).
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove screw 1 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Unintentional pressing to-
gether of brake pads
Component damage when
mounting the brake caliper or
when pressing the brake pads
apart
8
125
z