Triggered Streaming Acquisition; Acquisition Mode Multi-Record - Teledyne ADQ8-4X Manual

Table of Contents

Advertisement

If the readout process is as fast as the acquisition process, the memory size does not impose any lim-
itations.
If readout is scheduled after recording, the total data set from the measurement has to be limited to
1 GBytes to fit in the acquisition memory.

6 

& !
  
#
DESCRIPTION
a
The channel mask selects which channels to record and which to
discard.
b
The header generator apply header information to each record.
c
The acquisition memory is a DRAM on the digitizer which operate
as a FIFO.
Figure 26: Acquisition memory.
ACQUISITION MODE
Header
Header
Header
Raw mode no headers
Table 3:
Header memory requirement for triggered streaming acquisition mode.

7.3 Triggered streaming acquisition

Triggered streaming is described in [7].

7.4 Acquisition mode multi-record

ADQ8-4X supports acquisition mode multi-record. This mode is suitable for most user-scheduled single
shot or multi-shot applications. It is also suitable for control and surveillance applications where the long
pre-trigger makes it possible to see what preceded an event.
In the multi-record mode, one or several records are recorded into the acquisition memory and read out
on request from the user. The multi-record mode is straight forward to implement and is easy to use if
the data set is smaller than the on-board memory. The memory (DRAM) of the digitizers is split into cir-
cular buffers where one buffer can hold one record. Data is then written constantly into this buffer until
the trigger event arrives. After the trigger event
buffer. The accumulation of the record is then completed. The circular buffer contains the pre-trigger
data and the post trigger data. The position of the trigger may be anywhere in the buffer. The API
unwraps the data buffer before presenting the record to the user. The multi-record gives the feature of a
very long pretrigger.
Readout only can start when the complete record is captured and is always initiated from the user's
application.
Multi-record mode requires that all active channels record simultaneously.
19-2302 A
2020-09-16
 !
, 5
"!   !
3 4
RECORD SIZE
< 256 samples
> 256 samples
Asymptotic lower limit
Any
Record_length
* 

 

& !
+ , 
 
 -.-/
324
3 4
USER COMMAND
MultiRecordSetChannelMask
ADQ8-4X
> 5.9 %
< 5.9 %
3.1 %
0 %
-
Pretrigger_samples
ADQ8-4X Manual
19-2302 A 2020-09-16
36(46)
* #
0 1 2 
#+ ,
REF
is written into the
36(46)

Advertisement

Table of Contents
loading

Table of Contents