Level Trigger - Teledyne ADQ8-4X Manual

+, -
+, -
!+ ,
!+ ,%
!+ ,
' (
' (
# DESCRIPTION
a Backplane Trigger bus and DSTAR connections
b Set direction for each port in the backplane
c Output: Select output port for trigger output signal
d Output: This is the source for the trigger output signal
e Input: Select port for trigger sources
f Input: The backplane trigger signal is OR:ed from the selected ports
g Input: this is the backplane trigger to the trigger module
Figure 15: Trigger in the PXIe backplane.

4.10 Level trigger

The level trigger allows data-driven acquisition. When the data on a selected channel crosses the trig-
ger level, all channels on the ADQ is triggered,
falling edge. Here, rising edge is illustrated.
19-2302 A
2020-09-16
%  *
)
'( '(
% * *
'(
' (
Figure 16. The level trigger is set to trigger on rising or
ADQ8-4X Manual
19-2302 A 2020-09-16
'(
USER COMMAND
SetDirectionPXI
SetupTriggerOutput
SetupTriggerOutput
SetTriggerMaskPXI
SetTriggerMode
24(46)
REF
4.12
4.12
4.1
24(46)