Changing Your Station Security Code; How To Change The Station Security Code From Your Office Telephone Network; How To Change The Station Security Code When Out Of The Office Or From Your Cell Phone - Avaya EC500 User Manual

Changing Your Station Security Code

Changing Your Station Security Code
Use the procedure that follows to change your Station Security Code.
How to Change the Station Security Code from
Your Office Telephone Network
1. Dial the EC500 Security Feature Access Code.
You hear a dial tone.
2. If you are performing this procedure from an extension other than your
office phone, enter your office phone's Extension Number. If you are
performing this procedure at your office phone (or from your EC500 cell
phone which sends office caller ID), skip this step and go to Step 3.
3. Press the # button on your phone.
4. Enter your current Station Security Code.
5. Press the # button on your phone.
6. Enter the new Station Security Code.
7. Press the # button on your phone.
You hear a confirmation tone indicating your security code has been
changed.
8. Hang up to end the call.
NOTE:
If you do not receive a confirmation tone, hang up, verify the codes entered
and repeat the Change Security procedure from Step 1. If you still do not
receive a confirmation tone, contact your System Administrator for
assistance.
How to Change the Station Security Code When
Out of the Office or From Your Cell Phone
Perform this procedure from any Touch Tone telephone.
1. Dial the EC500 Access Number provided by your System Administrator.
You hear a dial tone.
2. Enter the EC500 Security Feature Access Code.
You hear a dial tone.
3. Enter your office phone's Extension Number.
4. Press the # button on your phone.
5. Enter your current Station Security Code.
Issue 3 August 2002 4-5