Chapter 4: Enabling/Disabling Ec500 And Maintaining Security; Introduction; Enabling Ec500; How To Enable Ec500 From Your Office Telephone Network - Avaya EC500 User Manual

Chapter 4: Enabling/Disabling EC500
and Maintaining Security

Introduction

After enabling EC500 for the first time, follow the guidelines and procedures in this
chapter to enable/disable your cell phone on a regular basis.
You enable EC500 when you want to answer calls placed to your office number on
your cell phone (for example, while you are out of the office during business
hours). You disable EC500 when you want calls to your office number to ring only
in the office at your desk, rather than also ringing your cell phone. As a rule, you
should always disable EC500 before shutting your cell phone off; that way, voice
messages go directly to your Corporate voice messaging system.
Changing your Station Security Code is important for security, and is also covered
in this chapter.

Enabling EC500

Use the procedure that follows to enable EC500. To enable specific EC500
extensions, see the procedure in the Appendix titled
Enable/Disable
How to Enable EC500 from your Office Telephone
Network
1. Dial the EC500 Enable Feature Access Code.
You hear a dial tone.
2. If you are performing this procedure from an extension other than your
office phone, enter your office phone's Extension Number. If you are
performing this procedure at your office phone (or from your EC500 cell
phone which sends office caller ID), skip this step and go to Step 3.
3. Press the # button on your phone.
4. Enter your Station Security Code.
EC500".
4
"Additional Ways to
Issue 3 August 2002 4-1