ip multicast prune-source
Command Mode
Description
Syntax
To Enable:
To Disable:
Name
host-addr
network-addr
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Interface
Configures the host address used in DVMRP prune packets
forwarded on this interface. The no form of this command restores
the default, which is: host-addr.
ip multicast prune-source {host-addr|network-addr}
[no] ip multicast prune-source
Table 6-12. Parameters, Keywords, Arguments
Definition
Enter the host address. The full host address goes into
the prune packet for the source address.
Enter the network address. Only the network portion
of the address goes into the packet.
The following example configures the DVRMP prune packets to the
host address for interface 1.
Cajun(configure if:1)# ip multicast
prune-source host-addr
P550/P550R/P880/P882
DVMRP
6-15