Set Buffering Fabric-Port (Priority Threshold) - Avaya Cajun P550R Cli Reference Manual

set buffering fabric-port (priority threshold)

Command Mode
Description
Syntax
To Enable:
Name
fabric-port-spec
routing
input|output
pri-threshold
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Configuration
Sets the input or output buffer priority threshold for a fabric
port. The default value for the priority threshold is 4.
set buffering fabric-port <fabric-port-spec>
[routing] {input | output} pri-threshold {1 | 2 | 3 |
4 | 5 | 6 | 7 | all-frames-normal-priority}
Table 4-4. Parameters, Keywords, Arguments
Definition
Enter a particular fabric port or a range of fabric ports on
a module.
Set the routing buffer parameters.
Input or output buffering.
The priority threshold ranges are:
1, 2, 3, 4, 5, 6 or 7
all-frames-normal-priority
The following example sets the buffer priority threshold
ratio for fabric port 4/1 to 5.
Cajun(configure)# set buffering fabric-port 4/1
routing output pri-threshold 5
Buffers for fabric-port 4/1 set.
P550P550R/P880/P882
Buffering
4-5