Chapter 9
To Enable:
To Disable:
Name
bitcount|decimal|
hexadecimal
9-18
ip netmask-format
Command Mode: Configuration
Description
Specify the format of netmasks in the show command output. The
no form of this command restores the default, which is a dotted
decimal format.
Command Syntax
ip netmask-format {bitcount|decimal|hexadecimal}
[no] ip netmask-format {bitcount|decimal|hexadecimal}
Table 9-13. Parameters, Keywords, Arguments
Definition
The keywords are:
• bitcount - Addresses are followed by a slash and
the total number of bits in the netmask. For
example, 131.108.11.0/24 indicates the netmask
is 24 bits.
• decimal - The network masks are in dotted
decimal notation. For example, 255.255.255.0.
• hexadecimal - The network masks are in
hexadecimal format as indicated by the leading
0X. For example, 0XFFFFFF00.
Sample Output
This example displays netmasks in bitcount format.
Cajun(configure)# ip netmask-format bitcount
Cajun P550R/P880/P882 Command Reference Guide