appletalk address
Command Mode
Description
Syntax
To Enable:
To Disable:
Name
network.node
Sample Output
Systems
Cajun P550R/P880/P882 Command Reference Guide
Interface
Configure an Appletalk Phase I Address for an Interface. The
no form of this command removes the Appletalk interface
itself.
appletalk address <network.node>
[no] appletalk address
Table 3-3. Parameters, Keywords, Arguments
Definition
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and 254.
Separate the network and node values with a period. When
omitted, the Appletalk address defaults to 0.0.
The following example enables an appletalk phase 1 address for on
the network node labeled foo.
Cajun (configure)# appletalk address foo
P550/P550R/P880/P882
Appletalk
2-5